AmScope T720 Series - Page 9

T720 Series Microscope
AmScope Proprietary Page 9 of 46
2.2.4 Install the Trinocular Port and C-Mount
Unscrew and remove the photo port cap from the top side of
the microscope head.
Screw in the Trinocular port.
If your camera has a c-mount, insert the c-mount adapter
onto the Trinocular port. If your camera does not have a c-
mount, you can skip this step.
2.2.5 Insert Eyepieces
Remove the eyetube caps.
Place the desired eyepieces into the empty
eye/ocular tubes.
Be sure to avoid touching the lenses.