Mi Series Audio Controllers
3
Mi Series Audio Controllers
Mi Series Features
Mi Series Controllers are expandable up to (64) zones. When the system is expanded beyond
8 zones an Audio Zone Expander is used to achieve the desired number of zones. Audio Zone
Expanders can supply up to (8) zones each in 4 or 8 zone increments.
Balancing the system could never be easier. Mi Series Controllers have Input Attenuation
and Output Gain Settings. Each source can be leveled to approximately the same level
insuring a smooth transition between source selections.
Mi Series Controllers allow the user to setup each Keypad to take them to their favorite radio
station, satellite channel or CD when a source is selected. The “Favorite Mode” makes the
whole listening experience seamless.
Turning the system on could never be easier. Not only does the series allow you to set up any
of the rooms into “Groups”. The group mode will allow you to set up the volume and the
source for the zones in the group.
“Keypad Lockout” allows the user to lockout the Keypad in any room from any Keypad. This
stops other users from using the system from the keypads that are locked.
The “Privacy Mode” locks out the paging override. This allows a specific zone to remain
silent as required
The Alarm clock allows the system to be turned on and off at scheduled times.
Mi Series Controllers are programmed from the front panel.
Speaker Wire Technology (SWT) utilizes standard speaker cable to provide not only music
to each zone but uses the same cable to interface with the controlling Keypad. This technology
presents attractive installation options, which may allow you to utilize existing cable
distribution in retrofit applications and allows for faster quicker installations.
Source Components
The Mi Series 4 supports up to (4) stereo audio source inputs.
The Mi Series 6 supports up to (6) stereo audio source inputs.
The Mi Series 8 supports up to (8) stereo audio source inputs.
Audio components are connected to the Mi Series Controllers on the back panel. Each audio input has a
corresponding buffered output used to connect the audio sources to additional Controllers or to other
devices that share the audio sources. This device supports RC5 and RC6 IR codes. Codes that fall outside
of this range may not function with the Controller. Industry standard RCA connectors at the rear of the
unit provide line-level input and output connections for devices such as CD, DSS, MP3 players etc. Two
Tuners can be installed onboard the Mi Series Controller.
Be aware that the tuners, when installed, will take up the first and second source inputs respectively.
Each source component is selected using the appropriate button on the Keypad, remote or other interface
which corresponds to one of the Mi Series 4, 6, or 8 audio device inputs (labeled as: input 1, input 2, and
input 3 respectively).
Mi Series Product Specifications (Cont.)
• Zone Outputs Connections for up to 8 zone outputs that connect to the keypads.
• Expansion Port RJ 11 Port connects main Controller with Zone Expanders.
Available Colors: Black, Silver
Dimensions (HWD):
(including feet)
• 4" x 17" x 13.5"
• 10.16 cm x 43.18 cm x 34.29 cm
Weight: Max. weight with 8 zones - 31 lbs (14.06 kg)
To Next Page
Loading...
