Mi Series Audio Controllers
4
Mi Series Audio Controllers
The Mi Series Controller is capable of learning IR commands from the audio components remote
control, allowing you to assign commands such as Channel Up or Down to keys on the system keypads.
IR Emitters
In addition to the RCA line input / output connections for each of the audio devices, there are also
connections for IR emitters (supplied) which completes the control circuit between the Controller and
the individual audio devices attached to the system (FIG. 2). Any commands received from the remote
keypads are processed and sent down the control lead to the audio device. Commonly available IR
emitter leads are unobtrusive, and attach to the audio device’s remote control sensor with double sided
tape, and connect to the Controller by 3.5mm mono output jacks located at the back of the unit.
Keypad Controls
The Mi Series Controller is accessed by remote keypads that provide basic transport control, source
selection and volume up and down.
Also available is the DAS-KP-NUM-G, a direct access Numeric Keypad that provides enhanced control
over the connected audio source devices. Some of these controls include direct access capability,
favorite’s source selection, zone grouping, setting the alarm clock, and Keypad lockout (FIG. 3).
Matrix Keypads are compatible with both Delta and Mi Series Audio Controller Systems. Refer to the
Audio Controller Keypads Operation/Reference Guide for details on installing and using the Keypads.
Just as a radio is incapable of playing two different stations at the same time, if
multiple zones are listening to the same source, they will be listening to the same
music. You may wish to consider multiple components of the same type (such as the
tuner) if different zones wish to listen to different radio stations at the same time.
FIG. 2 IR Emitter
FIG. 3 Matrix Keypads
DAS-KP-4e-G DAS-KP-NUM-G DAS-KP-LCD-GDAS-KP-6e-G
To Next Page
Loading...
