Mi Series Audio Controllers
6
Mi Series Audio Controllers
IR Remote Controls
The IR remote controls that are supplied by the manufacturer of the audio source equipment are used for
programming the Controller. However, the IR receiver on the DAS-KP-4e-G, DAS-KP-6e-G, DAS-KP-
LCD, and the DAS-IRRX-SWT user interfaces will not pass through IR commands issued by the audio
source remotes. It is intended to receive the remote IR signals generated by DAS-MRC remotes or by
learning-remotes that have stored the DAS-MRC remote codes.
DAS-MRC Mi Series IR Remote Control
The DAS-MRC Mi Series IR Remote Control (FG1101-50, 51) operates all the functions of the Mi
Series Keypads and can be used in any location where a Keypad, SWT Active speaker or Stealth IR
Receiver has been installed (FIG. 5).
Each Keypad has an integrated IR receiver to detect and process IR commands as if the Keypad had been
accessed directly.
FIG. 5 DAS-MRC IR Remote Control
Source Selection Buttons
Numeric Entry Buttons
Volume UP/DOWN Buttons
Blue LED
Navigation Array Buttons
To Next Page
Loading...
