Mi Series Audio Controllers
5
Mi Series Audio Controllers
DAS-IRRX-SWT Stealth IR Receiver
In addition to the Keypad selection, the system can be designed to include the DAS-IRRX-SWT Stealth
IR Receiver (FIG. 4), which provides zone or room control in conjunction with or in lieu of the DAS-
KP-4e-G, DAS-KP-6e-G or DAS-KP-LCD Keypad. The DAS-IRRX-SWT is a solution based product
which allows the user to overcome either architectural or environmental constraints.
This IR Receiver consists of a small interface box which contains all of the control circuitry and a small
cylinder which houses the receiver. The interface box is typically installed in a wall or ceiling and is
connected to the receiver box by a 4 conductor wire.
The Receiver wire is attached by a 4-pin male plug which plugs into the 4-pin female jack on the
interface box. The location of the receiver should be positioned so that it has an unobstructed view with
the remote control.
The DAS-IRRX-SWT interface connects to the Controller in exactly the same manner as the KP series
Keypad. The Mi Series Controller can accommodate up to 2 devices per zone.
The DAS-IRRX-SWT offers the same level of control that a KP series Keypad provides including direct
access features. The DAS-MRC IR remote transmits all commands in exactly the same manner as the KP
Series keypads.
FIG. 4 DAS-IRRX-SWT Stealth IR Receiver
Each zone can be configured with either 1 or 2 pushbutton keypads, or 1 pushbutton
Keypad and 1 Stealth IR Receiver, or 1 LCD Keypad and 1 Stealth IR Receiver.
The DAS-MRC’s IR commands can be programmed into a learning remote.
To Next Page
Loading...
