AMX DAS-M-0404 - Set Alarm Time (from each Keypad); Clear Alarm for a Specific Zone;Room; Clear Alarm for All Zones;Rooms

Advanced Keypad Controls
54
Mi Series Audio Controllers
Set Alarm Time (from each Keypad)
1.
Select Source & adjust the Volume to desired level.
2. Press buttons 5 & 6 simultaneously (source LED is turn ON).
3. Key in 24 hour alarm time (use "•" to separate Hours and Minutes).
4. Press ENTER (source LEDs turn OFF).
Examples:
 press 5&6 + 6•30 + ENTER - alarm set for 6:30 AM.
 press 5&6 + 18•30 + ENTER - alarm set for 6:30 PM.
Clear Alarm For a Specific Zone/Room
1.
Press buttons 5 & 6 simultaneously (source LEDs turn ON).
2. Key in "00".
3. Press ENTER (source LEDs turn OFF).
Clear Alarm for All Zones/Rooms
1.
Press buttons 5 & 6 simultaneously (source LED’s turn ON).
2. Key in "00".
3. Press & Hold ENTER (source LEDs turn OFF).
FIG. 4 Alarm Settings Buttons (Buttons 5 & 6)
Alarm Settings buttons