AMX DAS-M-0404 - System Setup Mode Screen; System Setup - MRC Setup Mode Screen

Programming
25
Mi Series Audio Controllers
Options on the Main Menu screen include:
 Setup - Accesses the System Setup Mode screen
 Backlight - Accesses the Backlight Options screen
 About - Accesses the About screen
 Exit - Exits the Main Menu
System Setup Mode screen
Select Setup from the Main Menu screen to access the System Setup Mode screen (FIG. 3):
Options on the System Setup Mode screen include:
 MRC - Accesses the MRC Setup Mode screen, where you can program sources and adjust
the input attenuation & output gain for each source, as well as configure Paging.
 Tuner - Accesses the Tuner Setup screens, where you can set the presets for each tuner
detected.
 Clock - Accesses the Clock Setup Mode screens, where you can set the time and view the
alarms that have been set for each room/zone.
 Exit - Exits the System Setup Mode screen.
System Setup - MRC Setup Mode screen
Select MRC from the System Setup Mode screen (FIG. 3) to access the MRC Setup Mode screen
(FIG. 4).
The options on this screen include:
 Setup - Accesses the MRC Setup Mode Options screen where you can program sources and
adjust the input attenuation & output gain for each source.
 Backlight - Accesses the MRC Backlight screen.
FIG. 3 System Setup Mode screen options
Exits this screen
To the Clock screens
To the Tuner screens
To the System Setup Mode scree
n
The acronym "MRC" stands for "Multi Room Controller", and refers to the Matrix
Audio Controller.
“Tuner” will only be displayed if a tuner module(s) is detected on board the Controller.