Programming
37
Mi Series Audio Controllers
Backlight Options screen
Select Backlight from the Main Menu screen to access the Backlight Options screen (FIG. 26). Use the
Backlight options to control when, and how bright the backlight will appear on the Controller’s LCD
screen.
The options on this screen include:
Intensity - Sets the intensity of the Controller’s LCD screen (Backlight)
Mode - Sets the Backlight Mode
Quit - returns to the previous screen
Backlight - Intensity
Select Intensity to access the Backlight Intensity options screen (FIG. 27), where you can set the
intensity of the Controller’s LCD screen:
To change the backlight intensity, select the option (i.e. 25%, 50%, 75% or Full), the backlight will dim
to the selected value.
When you return to the Backlight Intensity options screen, the selected intensity setting will
appear in brackets.
To exit the screen, select Quit.
Backlight - Mode
Select Mode to access the Backlight Mode options screen (FIG. 28):
To change the backlight Mode, select the option (i.e. Auto On, Always On, or Always Off).
Auto On (default): The backlight will remain on when accessing and using the Setup/
Programming Menus from the front of the Controller. 30 seconds after exiting the Menus, the
backlight will turn off.
Always On: backlight remains on at all times
FIG. 26 Backlight Options screen
FIG. 27 Backlight Intensity options screen
Return to the Main Menu screen
To the Backlight Modes screen
To the Backlight Intensity screen
Return to the previous screen
Select an intensity setting
To Next Page
Loading...
