Using DAS-KP LCD-G/W Keypads
57
Mi Series Audio Controllers
Using DAS-KP LCD-G/W Keypads
Overview
Matrix DAS-KP LCD keypads have a unique, touch-sensitive LCD panel that has 12 individual “grids”
(also called “touch fields”) that become different command buttons depending on what source and
previous command was selected (FIG. 1). It’s really the best of a DAS-KP-4e-G /-6e-G and
DAS-KP-NUM-G keypad all in a single unit, yet with even more customizable features as well as visual
user feedback.
While this section of the Mi Series manual has some information about the user functions, full
programming information can be found in the DAS-KP-LCD G/W manual (included with the Keypad).
Labeling the Keypad Grids
The Matrix touch panel keypads provide the ability to customize the following labels in the grids (also
called “touch fields 1-12” - see FIG. 2):
Source Names (from the Controller)
IR command labels (from the Controller)
The above customized field labels are stored on the Mi Series Controller so that it can be shared with
other LCD keypads, the Network Interface application, or anyone using RS-232 commands to control
the Mi Series Controller.
FIG. 1 DAS-KP-LCD-G Flush Mount LCD Keypad
DAS-KP-LCD-G DAS-KP-LCD-W
Surface-Mount LCD Keypad
Flush-Mount LCD Keypad
To Next Page
Loading...
