AMX Duet Module Interface Specifications
81
Mi Series Audio Controllers
AMX Duet Module Interface Specifications
Port Mapping
This module uses multiple virtual devices in order distinguish events for one zone from another or to
distinguish one input source from another.
Input Sources use ports 1 - 8.
Rooms/Zones use ports 1 - 64.
Channels
The UI module controls the Mi Series via channel events (NetLinx commands pulse, on, and off) sent to
the COMM module. The channels supported by the COMM module are listed below. These channels are
associated with the virtual device(s) and are independent of the channels associated with the touch panel
device. Depending on how the device is programmed each source has it’s own set of applicable
commands/channels (see the Input Source Types section on page 88).
An asterisk ( * ) indicates an extension to the standard API.
Mi Series - Port Mapping
Virtual Device Channels Levels Control Feedback
41001:1:0 All All All All
41001:2:0 - 41001:8:0 (inputs) 1,3,9,21,22,23,27,28,
40,44,45,46,47,48,49,
81,82,225,226,255,301,
303
none ?BAND
?XCH
XCH-
BAND-
XCH-
TUNE_MODE-
TUNERPRESETSAVE
41001:2:0 - 41001:64:0 (rooms) 24,25,26,164,
165,166,167,
168,169,196,
199,302,304, 305,306
1, 2,3,4,8 ?INPUT
INPUT-
INPUT-
Mi Series - Channels
Channel Description
1 PULSE: Play
3 PULSE: Pause
9 PULSE: Cycle Source Power
21 PULSE: Enter Button
22 PULSE: Next Station Preset
23 PULSE: Previous Station Preset
24 ON: Ramp Volume Up – used for feedback also
OFF: Stop Ramping
25 ON: Ramp Volume Down – use for feedback also
OFF: Stop Ramping
26 PULSE: Cycle Volume Mute
27 PULSE: Set Source Power On
28 PULSE: Set Source Power Off
40 PULSE: Cycle Tuner Band
44 PULSE: Menu Button
45 PULSE: Move Menu Cursor Up
To Next Page
Loading...
