Basic Keypad Functions
42
Mi Series Audio Controllers
Treble Mode
Treble Mode is the second action in the setup sequence. The source indicator lights will now rotate in a
clockwise direction indicating Treble Setup Mode. Treble Mode operates in the same manner as the bass
mode. Click the navigation button in the center to save the treble adjustment. Treble adjustments are
provided in +/- 1dB steps.
SRS Mode
SRS Mode is the third action in the setup sequence. All source indicator lights will now flash on and off.
Clicking the navigation button up will initiate “WOW” Mode. Clicking the button down will initiate
“Bass Boost”.
Clicking the button to the left will initiate the “3D Mode” and clicking the button to the right will initiate
the “Focus mode”. When you are satisfied, press the center of the navigation button to save the SRS
setting and exit the setup mode.
Privacy Mode
When the privacy feature is engaged, the room/zone cannot be paged, otherwise, the room/zone will
function normally. To use the privacy feature in a specific zone, the Keypad must be OFF and NO
SOURCE can be selected. To engage the Privacy Mode press and hold the center of the navigation button
until the source LED’s dimly glow.
Volume Control
Volume is changed in increments of +/- 3db up to half volume. The increment then increases to +/- 1db
until max volume is reached.
Volume increments are where 0 is minimum and 70 is maximum.
To Return Bass/Treble to 0dB and Balance to Center, press and hold the Center
Navigation Button, while in each mode.
SRS/WOW is a registered trademark of SRS labs, Inc.
To Turn SRS Off, Press and hold the Center Navigation button while in SRS mode.
The Balance adjustment is available in both bass and treble setup modes. However,
it is the same Balance adjustment in each.
To Next Page
Loading...
