Basic Keypad Functions
46
Mi Series Audio Controllers
Privacy Feature
When the privacy feature is engaged, the room/zone cannot be paged, apart from this, the room/zone will
function normally.
To use the privacy feature in a specific zone, the Keypad must be OFF (no sources selected)
Zone Control - On/Off
Turn a single ZONE ON - Press any Source Button
Turn a single ZONE OFF - Press the Active Source Button
Turn ALL ZONES ON - Press & Hold any Source Button for a duration of 4 seconds
(the source selected will play in ALL Zones)
Turn Source OFF in ALL ZONES - Press and Hold the Active Source Button
(The Source Selected Will Turn Off in ALL Zones)
Turn ALL ZONES OFF - Press & Hold Source Buttons 1 and 2 simultaneously for a duration
of 4 seconds.
SOURCES & how they work
When a source button is selected, the following occurs:
The SOURCE is turned ON & if there is a FAVORITE assigned for the zone then the favorite
begins playing.
If NO FAVORITE has been set for the source, then the following occurs:
If source = On-board TUNER, the 1st preset will begin playing. If there are NO presets, then
the last station listened to will begin playing.
If source = External TUNER, then the last station listened to will begin playing.
If source = CD, then the 1st Track of the first CD will begin playing, unless the source has the
ability to retain its previous settings
If source = SATELLITE, then the last station listened to will begin playing.
NAV button Action
UP: N/A
DOWN: N/A
LEFT: N/A
RIGHT: N/A
CENTER: Press & hold to engage PRIVACY.
Source buttons will glow steadily at a low level until Privacy Mode is disengaged.
To DISENGAGE, turn on the zone by selecting one of the source buttons.
ALL ZONES OFF: All zones will be turned off, and no sources will play. One minute
after an ALL OFF has been performed, all sources will power down and the Controller
will Default to “Standby Mode”.
To Next Page
Loading...
