AMX DAS-M-0404 - To Create a Preset; To Recall a Preset; To Clear All Presets; Setting “Presets” Per Source, Via Numeric Keypad (1-0)

Advanced Keypad Controls
49
Mi Series Audio Controllers
To Create a Preset
1.
Select the source
2. Direct Tune to the station of choice (enter station # + ENTER)
3. Select the “dot/asterisk” key
4. Key in the Preset Number (1 – 10)
5. Press & Hold ENTER
Examples:
1. Direct Tune to Station + (•) + (preset #)
2. Then press & hold ENTER
Tune to 1050AM then press • + 5 + Press & Hold ENTER (Stores 1050AM as preset #5)
To Recall a Preset
1.
Select the source
2. Select the “dot/asterisk” key
3. Key in the preset # (1 – 10)
4. press ENTER
Examples:
 * + preset # + ENTER
 * + 5 + ENTER - Recalls Preset #5
 * + 1 + ENTER - Recalls Preset #1
 * + 4 + ENTER - Recalls Preset #4
To Clear All Presets
1.
Select the source.
2. Select the “dot/asterisk” key.
3. Key in “00”.
4. Press & Hold ENTER.
Example:
Press the “dot” key + 00 + press & hold ENTER - All presets will be cleared.