Advanced Keypad Controls
53
Mi Series Audio Controllers
Alarm Settings (Buttons 5 & 6)
Alarm Clock - Overview
In order to use the Alarm feature, a System Time must first be entered on the Main Controller, via the
Front LCD (see below). Then, from each keypad for which alarm clock functionality is required, the user
can select a Source, adjust the volume and set the alarm time (using the 24HR clock).
When the alarm time is reached, the source selected will turn ON and the volume will ramp up to the set
volume and begin playing. At this point the source will behave normally.
Setting System/Clock Time
From the front of the Main Controller, select “CLOCK”, then select “Set Time”. This action invokes the
following screen (FIG. 3):
Press “Hour” to increment the HH (hours) from 1 through 24.
Press “Minute” to increment the MM (minutes) from 01 through 60.
Press “Second” to increment the SS (seconds) from 01 through 60.
Press “Set” to set the clock to the time displayed.
To use the Alarm feature, a System Time must first be entered on the Main Controller, via the front LCD.
If a favorite has been set, the favorite will begin playing, else, the last station/CD will
begin playing.
FIG. 3 Set System/Clock Time
To Next Page
Loading...
