Using DAS-KP LCD-G/W Keypads
59
Mi Series Audio Controllers
2. From the menu displayed, select SETUP / MRC / PROGRAM.
3. Select the source # of which you wish to customize the source name. The default Source name will
be displayed.
4. Select Label. The first letter of the Source Name will be highlighted. Use the UP/DOWN buttons to
change the letters in the source name.
To move from letter to letter, use the FORWARD >> button.
To delete a letter, use the << BACK button.
Press the CENTER button to save the label.
Customizing Source Command Labels
1. Enter the Setup menu from the front of the Matrix Controller, by pressing the SELECT button.
2. From the menu displayed, select SETUP / MRC / PROGRAM.
3. Select the source # of which you wish to customize the source command name.
4. Select Learn IR. The first IR command for the source will be displayed.
5. Select Next until the IR command you wish to customize is displayed.
6. Select Label. The first letter of the IR Command Name will be highlighted. Use the UP/DOWN
buttons to change the letters in the IR command name.
To move from letter to letter, use the FORWARD button.
To delete a letter, use the BACK button.
Press the CENTER button to save the label.
FIG. 4 Press the SELECT button on the front of the Matrix Controller
Source Names are limited to 6 characters.
Source Command Names are limited to 6 characters.
To Next Page
Loading...
