RS-232 Commands / Messages
78
Mi Series Audio Controllers
Controller Status Messages (Cont.)
CALMr,s,v,h,m Alarm Status, where:
•‘r’ is the room, valid values are from 1-64
•‘s’ is the source, valid values are:
0: no alarm is set
1-8: alarm is set for the corresponding source
•‘v’ is the volume, valid values are:
101: Mute
0-55: 0-(-55) dB
•‘h’ is the hour, valid values are from 0-23
•‘m’ is the minute, valid values are from 0-59
RSSTx,y,z General Sirius Radio Status, where:
•‘x’ is the Sirius number (1-2)
•‘y’ is the Sirius Status Index (0-7)
•‘z’ is the Status Message
RSIDx,y Sirius Radio ID Status, where:
•‘x’ is the Sirius number (1-2)
•‘y’ is the Sirius Radio ID String (36 characters max)
RSCIx,y,s,z,
c,t,a,p
Sirius Radio Channel Status, where:
•‘x’ is the Sirius number (1-2)
•‘y’ is the Channel number (3 digits)
•‘s’ is the Service ID (3 digits)
•‘z’ (0=play, 1=no play)
•‘c’ is the Channel Name (36 characters max)
•‘t’ is the Title (36 characters max)
•‘a’ is the Artist (36 characters max)
•‘p’ is the Composer (36 characters max)
RSCTx,y Sirius Radio Category Status, where:
•‘x’ is the Sirius number (1-2)
•‘y’ is the Category number (0-99)
RSCHs,x,y,z Sirius Radio Channel Number Status, where:
•‘s’ is the Sirius number (1-2)
•‘x’ is the Category number (0-99)
•‘y’ is the Channel number (3 digits)
•‘z’ is the Service ID (3 digits)
To Next Page
Loading...
