Decoder Configuration Options
57
N1000 Series User Manual
TABLE 25 KVM Page Options
Option Description
USB Enable Enable to allow the ability to share mouse and keyboard over the network. Enabled by default. When disabled,
the unit works like a non-KVM unit and ignores any keyboard or mouse activity.
Permission Level Set the permission level for the Decoder. Decoders can only establish USB connection to Encoders with the
same or higher permission level. See the section Advanced KVM Setup (With Added Security Features) on
page 24 for more information.
Connect to Encoder IP
Address
Connects the KVM portion of the Decoder to the Encoder with the specified IP address. Video in not affected by
this setting, only KVM functionality.
Switch/Disconnect Switch to or disconnect from the Encoder mentioned above.
KVM Advanced Settings Enable to access the Advanced settings described below.
KVM Encoders View/edit the list of Encoders associated with this Decoder. Here you can Add new/overwrite Encoders to the
list by Name or IP Address as well as assign Hotkey Numbers and Passwords. You can also end the Decoder/
Encoder association by clicking the Remove button.
Import KVM CSV Click the Choose File button and browse to the KVM CSV file on your computer that you would like to use to
configure the unit. Then click Upload. For more information, see the section Advanced KVM Setup (With Added
Security Features) on page 24.
Export KVM CSV Click the Download KVM CSV Export link to retrieve the current KVM CSV configuration file.
Reset USB and KVM
Settings
Resets all USB and KVM settings.
To Next Page
Loading...