Decoder Configuration Options
45
N1000 Series User Manual
Advanced Settings
The section of the Settings page shown in Figure 42 is displayed when you click the Advanced Settings link. Options are described
in Table 14
.
FIG. 42
Advanced Settings
TABLE 14 Settings Page: Advanced Settings
Option Description Notes
Settings Lock Enable to lock the Decoder IP settings and stream
number, preventing automated processes (from N-Able
or N-Command) from occurring.
This does not prevent a control system from making
changes or a user from manually making changes.
Input audio for
LocalPlay
Select to enable the input audio when the Live/Local
menu is set to one of the local images.
YCbCr 4:2:2 Output Set YCbCr output to be disabled, enabled, or selected
automatically based on the connected display.
Simplif ied HDMI Detect Select to enable the detection of a display device using
a simple line level check.
Last Frame Hold Select to cause the Decoder to continue playing the last
valid video frame if the network connection is lost.
When enabled, Local Play will not appear.
HDMI off on stream loss Select to disable the video output drive when the video
stream is not available.
HDMI Enable Select to enable output video.
To Next Page
Loading...