7
2、Personal verify method: Set user verifies method.
After setting, press【M】to save and exit.
Example: add new user according to the process as following.
Input user ID:
Input user ID from keypad. Press the【C】to delete and re-enter, press【OK】
to confirm.
Register Password:
Press 【IN/】、【OUT/】key to fix the cursor in “password” field, input the
password , and press【OK】.
Register card:
Swipe RFID card on Card Read Area
Register Fingerprint:
The default fingerprint registering order: 0、1、2、3、4、5、6、7、8、9.
Select one finger to register by pressing number keys or 【IN/】、【OUT/】
key , then press the same finger 2 times in correct way following the prompt voice.
Admin Setup:
Press 【IN/】、【OUT/】 key to fix the cursor in “admin” field, set the user as
administrator or not.
Match Mode:
To Next Page
Loading...
