Apogee ONE - Apogee Maestro 2 - Interface; Devices Sidebar; Device Icon & ID Button

22
ONE by APOGEE – User’s Guide
Apogee Maestro 2
Devices Sidebar
Any Maestro-compatible Apogee interfaces connected
to the host computer are displayed in the Devices
sidebar, regardless of whether the connection is made
via Symphony PCI card, USB or FireWire. Hardware
settings are displayed by rst selecting one or more
interfaces in the Devices sidebar and then clicking
on a tab.
Device Icon & ID Button
A device icon and ID button is placed adjacent to each
row of parameters to identify the hardware unit to
which the row belongs. By clicking on the ID button,
the corresponding hardware unit’s front panel will
illuminate. Each hardware unit is assigned a Peripheral
Prex (A-Z, found in Maestro’s Device Settings tab
window) which is displayed on the ID button.