Apogee ONE - Connecting Headphones; Connecting Powered Speakers

7
ONE by APOGEE – User’s Guide
Connecting Headphones
• Connect headphone directly to ONE’s front panel jack. If
your headphones include a 1/8” to 1/4” adaptor, remove it before
making the connection.
• Open Apogee Maestro software and select Stereo in the Output
Level menu.
Connecting Powered Speakers
• Connect powered monitors to ONE’s front panel jack using
an adaptor cable with an 1/8” stereo plug to connect to ONE and
two suitable plugs for connection to your speakers.
• Open Apogee Maestro software and select Stereo in the Output
Level menu.
• To set the speakers’ input level control (sometimes labelled input
sensitivity), please see the description on page 23.
• If hum or buzz is heard in the speakers, please see the
Troubleshooting tip on page 29.