Apogee symphony i/o mk II User Manual

Main Features
Thunderbolt Audio Interface Mode
The Thunderbolt Card provides a high-quality professional & low-latency connection to the Mac. Up to two Symphony
I/O Mk II Chassis can be connected to the same system for up to 64 channels of inputs & 64 channels of outputs.
Before proceeding, please ensure the Symphony I/O Mk II Software has been installed, and firmware updated as
described on page 16.
Selecting the Thunderbolt Audio Interface Mode
For units equipped with both the Thunderbolt Card, and an Option Card, ensure the unit is in the Thunderbolt Audio
Interface Mode:
1.
Using the front panel Touch Screen, navigate to the Settings > Configuration page.
2.
If the Audio Interface Mode is not “Thunderbolt”,
touch the Audio Interface Mode button.
3.
Confirm that you want to switch modes by
selecting “Yes”.!
4.
The unit will reboot into the selected Mode.
5.
You must unplug the Thunderbolt cable, then reconnect before the unit will be recognized by your Mac.
Symphony I/O Mk II - User's Guide Page 28

Apogee symphony i/o mk II Specifications

General

Brand	Apogee
Model	symphony i/o mk II
Category	Accessories
Language	English