Appendix B Example RQ Experiment
86 Applied Biosystems 7300/7500/7500 Fast Real-Time PCR System Relative Quantification Getting Started Guide
Notes
The SDS Software 1.3.1 displays the Well
Inspector.
7. Enter the sample names in the Well Inspector
(View > Well Inspector).
IMPORTANT! If your experiment does not use
all the wells on a plate, do not omit the wells
from use at this point. You can omit unused wells
after the run is completed. For more information
about omitting wells, refer to the Online Help.
The figure on the right shows a completed plate
set up.