Portable Test Equipment
User’s Guide
PTE-UGFW56a-EN www.appliedp.com
Resolution ............. Resolution of showed measured and calculated values in one phase
screens: Standard (5 digits), High (6 digits) or Maximal (7 digits)
BACKLIGHT ....................... Settings of display’s backlight
Intensity .................. Backlight intensity: 10%, 20% … 90% or 100%
Auto off timeout ..... Automatic backlight switch-off time: 1-30 min or OFF (inactive)
SOUNDS ............................. Settings of sounds
Keypad beep ........... Acoustic indication of keys pressing: ON or OFF
New sample beep ... Acoustic indication of new sample during testing: ON or OFF
Last sample beep ... Acoustic indication of last sample during testing: ON or OFF
Warnings ............................ Enable (ON) / disable (OFF) of showing system warnings (and errors)
PRINTER ........................... Settings of printer
Type ....................... Switching between printer types (PP 1000 or P-W40)
Connection ............ Switching between printer connection (RS232 or Bluetooth)
PRINTER REPORT ............. Settings of printer report
Type ....................... Switching between printer report types (AUTO, NEW or OLD)
Vector Diag............. Enable (ON) / disable (OFF) of showing Vector Diagram
Bluetooth ........................... Enable (ON) / disable (OFF) of Bluetooth feature
Mode ................................ Switching between Tablet(slave) and Printer(master) mode of bluetooth
chip
Paired Printers .................. List of available/paired bluetooth printers
To Next Page
Loading...
Need help?
General