27
Quality for Professionals
专业质量
Set the duration for the seed rate calibration test here. If a calibration
button is installed and "Calibration button present?" has been set to YES
in the programming menu, this item will not appear.
在此处设置播种量校准试验的持续时间。如果安装了校准按钮，并在编程菜
单中将“是否存在校准按钮”设置为是，则该菜单项将不会出现。
TIP:
提示：
For smaller seeds, such as rape, phacelia, poppy, etc.，it is best to calibrate for 2
minutes.
对油菜籽、钟穗花籽、罂粟花籽等较小的种子来说，校准试验的持续时间最好为两
分钟。
The standard calibrating time is 1 minute
标准的校准时间为 1 分钟。
For larger seeds, such as wheat, barley, peas, etc., it is best to calibrate for 0.5
minutes.
对于诸如小麦、大麦、豌豆等较大的种子，校准试验的持续时间最好为半分钟。
NOTE: Before starting the test, make sure that you have also removed the calibration cover
and determine whether you will use this or the calibration slide. Ensure that you have
installed the calibration sack or a collection container so that they are precisely positioned!
The seed rate calibration test can be cancelled at any time by pressing the or the
button on the control module.
注意
：试验开始之前，请确保您已经移除了校准盖，并已决定使用该装置或是校准滑片。请
确保，您已经安装了校准袋或收集容器，以便进行精确安装！可通过按下控制模块上的 或
按钮，随时取消播种量校准试验。
To Next Page
Loading...
Need help?
General