OPERATION
If the HV Power, 12V Power or Brake Failure indicators
remain lit after the FUV is started, turn off the FUV and
contact Arcimoto for assistance.
Release the Parking Brake
The Parking Brake must be released before driving.
Don’t drive until the parking brake is fully disengaged.
Driving the FUV with the parking brake engaged or
partially engaged can damage the brakes.
With the Brake pedal depressed, press the Parking Brake
button on the Control Panel:
Press the Parking Brake button on the Control Panel to
release the Parking Brake.
The Parking Brake is fully released when all 3 LEDs on the
button are off (approximately 3 seconds).
FUV Owner's Guide - 87
To Next Page
Loading...
