ARCIMOTO FUV - Turn the FUV on

FUV Owner's Guide - 84
NOTE
As a safety feature, both front seat belts must be latched
for the FUV to allow motion.
Turn the FUV ON
Before the FUV can be started, it must first be turned ON.
There are several ways to turn the FUV ON:
Key Switch - Insert the Key and turn the Key
switch to the ONposition.
PIN entry on the Display - Touch the Display
to invoke the PIN entry page. Enter the 6-digit
PIN for your FUV and press ENTER.
When the FUV is turned on, the FUV sounds a start-up
chime and the Display turns on, displaying the Arcimoto
logo:
Once the FUV has been turned ON, it can be started.




OPERATION