FUV Owner's Guide - 28
Key Switch
The Key switch is located on the right side of the
instrument panel. It has two positions: OFF and ON.
Insert the Key and turn it to the right to switch it to the ON
position. Turn the Key to the left to switch it OFF.
Key Switch- ON Position
Turn the Key to the ON position to turn the FUV ON: You
will hear the start-up chime and see the Display turn on.
When the FUV is turned ON, all electronic features are
available, but the motors are off.
The FUV must be turned ON in order to start.
Tostart, turn the Key to the ONposition and press the
START button on the left grip (see page 30). Once the
FUV has been started, it will move in the direction
specified by the Direction switch (see page 32) when the
throttle is twisted.
Always check the Direction switch before twisting the
throttle.
Because the FUV is silent, it may not be obvious that the
vehicle has been started. Never leave the FUV
unattended while it is turned ON!
NOTE
There are alternative methods to turning ON the FUV
that do not require a Key. These include using the
Display to enter the 6-digit PIN (see 81) and using the
Arcimoto Mobile App (see page 1).
CONTROLS
To Next Page
Loading...
