FUV Owner's Guide - 120
Wheels and Tires
Avoid using strong acidic wheel cleaners. If such products
must be used on hard-to-remove dirt, do not leave the
cleaner on the affected area any longer than instructed.
Thoroughly rinse the area off with water, immediately dry
it, and then apply a corrosion protection spray.
Do not use products such as tire dressings on tires as
this can deteriorate traction.
Elevating the FUV
In the case that you want to remove a wheel in order to
have a flat tire serviced, the FUV will have to be elevated,
as described in this section.
The FUV does not come with a floor jack. If your FUV
requires service, contact Arcimoto Technical Support at
(541) 780- 0032. The instructions in this section are
intended to provide safe guidelines, in the case that you
decide to elevate your FUV, in order to remove a wheel
that has a flat tire.
Always have your tires serviced by a tire service
professional.
Because of the unique geometry and weight distribution
of the FUV, special care must be taken when elevating the
vehicle. Follow the instructions in this section to avoid
personal injury or damage to the FUV.
MAINTENANCE AND CLEANING
To Next Page
Loading...
