FUV Owner's Guide - 58
Never wear the shoulder belt under your arm or behind
your body. Always wear both seat belts. Never wear just
one. Failure to wear the seat belts properly could result
in serious injury or death.
Fastening the Seat Belts
Get in and make sure your back is flat against the seat and
your feet are flat on the floor, then secure both seat belts.
1. With your right hand, reach across and smoothly
pull the belt downward and across your left
shoulder and lap.
2. Make sure the webbing is not twisted, and insert the
tongue into the buckle on the right side of the seat
until you hear a “click.” Give a tug on the tongue to
ensure the buckle is locked.
3. The seat belt should be tight across the lap belt and
shoulder belt, and there should not be any slack. If
there is any slack, tighten the seat belt by pulling up
on the shoulder belt, which will take up the
additional slack.
4. With your left hand, reach across and smoothly pull
the belt downward and across your right shoulder
and lap
5. Make sure the webbing is not twisted, and insert the
tongue into the buckle on the left side of the seat
until you hear a “click.” Give a tug on the tongue to
ensure the buckle is locked.
6. The seat belt should be tight across the lap belt and
shoulder belt, and there should not be any slack. If
there is any slack, tighten the seat belt by pulling up
on the shoulder belt, which will take up the
additional slack.
SEAT BELTS
To Next Page
Loading...
