ARCIMOTO FUV - General

FUV Owner's Guide - 76
Rear Lights
Verify that the taillights, reverse lights
and license plate light illuminate. Apply
the brakes and verify that the tail light
lamps increase in brightness.
Turn Signals
Verify that the left and right turn signals
flash at the front and rear of the vehicle,
and that the corresponding indicator
lamp flashes in the gauge.
Emergency Flashers
Press the top of the hazard switch to
turn the flashers on. Verify that all four
turn signals flash, as well as the indicator
lamps in the gauge.
Press the bottom of the switch to turn
the flashers off. Verify that all signals
and indicator lamps stop flashing.
Horn
Press the horn button. Verify that the
horn sounds loudly.
Steering
Check for smooth operation:
1. Position the FUV on a level surface.
2. Turn the steering wheel full left, then
full right. The action should be
smooth, but not loose.
General
Seat Belts
Check all seat belts for damage
(including cuts, wear, fraying or
stiffness) and to ensure smooth
operation. Verify that the latch plate
slides smoothly into the housing and
clicks to indicate that it’s securely
latched. Verify that the buckle releases
freely.
Ensure there is no obstruction that
prevents the belt from fully retracting.
Tires
Inspect tire condition, pressure and
tread depth.
Wheels
Inspect for loose, damaged or missing
wheel nuts.
Park Brake
Verify that the FUV does not roll when
the park brake is engaged.

PRE-RIDE INSPECTION