PRE-RIDE INSPECTION
Brake System
Check the foot brake pedal for
excessive travel or a spongy feel.
Inspect brake system hoses,
connections and brake pads.
Throttle
Check throttle, ensure smooth
operation and full return.
Front Suspension
Check for leaks or damage, verify
smooth operation.
Rear Suspension
Check for leaks or damage, verify
smooth operation. Ensure the correct
amount of suspension travel and ground
clearance. See CAUTION below.
Fasteners
Inspect entire vehicle for loose,
damaged or missing fasteners. Always
replace stripped, damaged or broken
fasteners before riding.
Mirrors Adjust for proper side and rear view.
Windshield Wiper
Check for damage, verify smooth
operation.
Washer Fluid
Reservoir
Check that the windshield wiper fluid
level is between the MIN and MAX
marks on the reservoir. Refill as
necessary (see page 109).
Inadequate ground clearance could result in
components contacting the ground, causing loss of
control and serious injury or death. Always ensure
ground clearance is at specification.
If any damage is found, have the FUV checked by an
authorized Arcimoto technician.
In addition to these pre-ride inspections, the FUV requires
regular scheduled maintenance to ensure safety and to
keep the FUV in top running condition. Refer to page 147
for details.
FUV Owner's Guide - 77
To Next Page
Loading...
