CHARGING
Plug It In!
These three words are the best advice we can give you.
To get the maximum lifespan out of your HV Battery Pack,
just keep the FUV plugged-in when not in use. The
electronics in the FUV will keep the battery full, well
balanced and ready for use without any risk of
overcharging. Thermal sensors continuously keep an eye
on the battery temperature to avoid overheating.
When you finish a drive, plug the FUV into a charging
station right away, while the Battery Pack is still warm
from the drive. This way, it can be charged at full power,
even when the outside temperature is very low.
This is good for the long-term health of the HV Battery
Pack because it helps ensure that the FUV is always fully
charged and ready to roll.
Charging - IMPORTANT
SAFETY INSTRUCTIONS
Charging an electric vehicle can stress a building’s
electrical system more than a typical household
appliance.
Before plugging into any electrical outlet, have a qualified
electrician inspect and verify the electrical system is rated
appropriately.
l Electrical outlets may wear out with normal usage
or may be damaged over time, making them
unsuitable for electric vehicle charging.
l Discontinue use if the electrical outlet/plug gets hot
while charging. Have the electrical outlet serviced
by a qualified electrician.
l Mount the charging cord to reduce strain on the
electrical outlet/plug.
FUV Owner's Guide - 103
To Next Page
