FUV Owner's Guide - 130
DANGER: DONOT reach into the safety
fuse access portal. There are no user-
serviceable parts, and doing so exposes
you to potential arc- flash risk,
electrocution, and voids the warranty.
There is a risk of fatal injury.
DANGER: DONOT allow any metal
objects (tools, jewelery) inside the safety
fuse access portal or near any of the
internal components. Doing so exposes
you to potential arc- flash risk,
electrocution, and voids the warranty.
There is a risk of fatal injury.
Hard Reset the 12V System
The following instructions describe how to perform a
hard-reset of the 12V electrical system in the FUV.
Safety
These instructions do not require accessing any high-
voltage components. However, always be aware, and
follow these basic safety rules:
l Remove all metal jewelery before following these
instructions.
l Keep metal objects of any kind (tools, jewelry)
away from any internal components.
Tool Required
l Phillips head screwdriver
MAINTENANCE AND CLEANING
To Next Page
