WORKING WITH PINS
The new User PIN can now be used to start the FUV. Note
that the User-PIN can be changed at any time.
The User PIN for your FUV is:
Record your User PIN below, and keep this card for your
reference. Since you can easily change your User PIN, use
this page to record each new User PIN assignment:
Starting the FUV Via PIN
When the FUVis OFF:
1.
Press anywhere on the Display to invoke the Enter
PIN keypad.
2. Enter a valid 6-digit PIN (either the factory PIN, or the
current User PIN).
3.
Press ENTER on the Enter PIN keypad to start the
FUV.
Shutting the FUVOff Via PIN
When the FUVis ON:
1.
Press anywhere on the Display to invoke the Enter
PIN keypad.
2. Enter a valid 6-digit PIN (either the factory PIN, or the
current User PIN).
3.
Press ENTER on the Enter PIN keypad to turn the FUV
off.
FUV Owner's Guide - 81
To Next Page
Loading...
