ARCIMOTO FUV - Page 94

FUV Owner's Guide - 80
1. Press anywhere on the
Display to invoke the
Enter PIN keypad.
2. Enter the 6-digit factory
assigned PIN.
3. Press ENTER to start
the FUV.
4. Hold the trigger on the
left grip and cycle the
brake pedal to access
the Drive screen.
5.
Press CONFIG at the
top right of the screen
to open the Con-
figuration Options
screen:
6.
Press PIN on the left
side of the screen .
7. The system will prompt
you to verify that you
are changing the PIN.
Press CONFIRM to pro-
ceed.
WORKING WITH PINS