CHARGING
When using electric products, basic precautions should
always be followed, including the following:
l Read all the safety warnings and instructions
before using this product. Failure to follow the
warnings and the instructions may result in
electric shock, fire, and/or serious injury.
l Never leave children unattended near the vehicle
while the vehicle is charging and never allow
children to play with the charge cord.
l If the plug provided does not fit the electrical
outlet, do not modify the plug. Arrange for a
qualified electrician to inspect the electrical
outlet.
l Do not put fingers into the electric vehicle
connector.
l Do not use this product if the flexible power cord
or the electric vehicle cable is frayed, has broken
insulation, or shows any other signs of damage.
l To reduce the risk of fire, installations shall
comply with the requirements of National Electric
Code, ANSI/NFPA 70 (USA) or Canadian
Electrical Code CSA 22.1 and IEC 60364(Canada)
– Electrical installations in buildings, depending
on the region in which the unit is being installed.
The installer shall comply with any additional local
requirements mandated by the country and/or
municipality.
l Do not use this product if the enclosure or the
vehicle plug is broken, cracked, open, or shows
any other indication of damage.
l The plug must be plugged into an appropriate
electrical outlet that is properly installed in
accordance with all local codes and ordinances.
If ground is missing, the charge cord indicators
will indicate an electrical system fault and the
vehicle may not charge.
FUV Owner's Guide - 105
To Next Page
