FUV Owner's Guide - 4
Battery Management System (BMS)
The FUV uses a Battery Management System (BMS) to
monitor the condition of the HV Batteries, and optimize
Battery performance, range, and life.
The BMS safeguards the HV Batteries by means of safety
interlocks. These interlocks turn off or control certain
operations that could damage the power pack. The BMS
also monitors the HV Batteries for a host of predefined
conditions, and then takes appropriate action.
Front Access Panel
The Front Access Panel can be removed to access the
windshield wiper fluid remote fill neck (see page 116).
However, be aware that there are several high-voltage
components behind the Front Access Panel. These
include inverters and high-voltage cables and connectors.
All high-voltage components are protected by a plastic
safety screen. However, it is important to exercise caution
any time the Front Access Panel is removed.
DANGER: DONOT reach behind the
plastic safety screen. There are no user-
serviceable parts, and doing so exposes
you to potential arc- flash risk,
electrocution, and voids the warranty.
There is a risk of fatal injury.
SAFETY
To Next Page
Loading...
