Arcom SBC-GX1 Quick Start Manual

SBC-GX1 Windows XP Embedded Quickstart Touchscreen
If you download a new XP image to the SBC-GX1, this detection routine is carried out
the first time the touchscreen driver is run. The calibration process must be completed
and the results saved.
If the jumpers LK2 and LK3 are fitted on the TSC1, then TSC1 is in 10-bit mode.
Otherwise it is in 8-bit mode.
For more details, refer to the document Touchscreen.html. This is on the CD that
accompanies this Development Kit, in the folder
\Documentation\DataSheets\Touchscreen.
© 2004 Arcom Issue D 20

Arcom SBC-GX1 Specifications

General

Brand	Arcom
Model	SBC-GX1
Category	Motherboard
Language	English