SBC-GX1 Windows XP Embedded Quickstart Appendix A – Contacting Arcom
Appendix A – Contacting Arcom
Arcom sales
Arcom’s sales team is always available to assist you in choosing the board that best
meets your requirements. Contact your local sales office or hotline.
Sales office US Sales office Europe
Arcom
7500W 161
st
Street
Overland Park
Kansas
66085
USA
Tel: 913 549 1000
Fax: 913 549 1002
E-mail: us-sales@arcom.com
Arcom
Clifton Road
Cambridge
CB1 7EA
UK
Tel: 01223 411 200
Fax: 01223 410 457
E-mail: euro-sales@arcom.com
Full information about all Arcom products is available on our Web site at www.arcom.com
.
While Arcom’s sales team can assist you in making your decision, the final
choice of boards or systems is solely and wholly the responsibility of the buyer.
Arcom’s entire liability in respect of the boards or systems is as set out in
Arcom’s standard terms and conditions of sale. If you intend to write your own
low level software, you can start with the source code on the disk supplied. This
is example code only to illustrate use on Arcom’s products. It has not been
commercially tested. No warranty is made in respect of this code and Arcom
shall incur no liability whatsoever or howsoever arising from any use made of
the code.
Technical support
Arcom has a team of technical support engineers who can provide assistance if you
have any problems with your SBC-GX1.
Technical support US Technical support Europe
Tel: 913 549 1010
Fax: 913 549 1001
E-mail: us-support@arcom.com
Tel: +44 (0)1223 412 428
Fax: +44 (0)1223 403 409
E-mail: euro-support@arcom.com
© 2004 Arcom Issue D 54
To Next Page
Loading...
Need help?
General
