SBC-GX1 Windows XP Embedded Quickstart Installing the support software
Sample images
The Arcom Windows XP Embedded Development Kit includes two different Windows
XP Embedded images with differing functionality, called Standard XPe and Minimal
XPe. The Standard XPe image is installed on the CompactFlash for the SBC-GX1
board in the Development Kit. For instructions on installing the Minimal XPe image, see
Installing the Windows XP Embedded Minimal XPe image
, page 31.
Further details about both images are provided below:
Standard XPe
Summary:
Quite large, includes most important features.
Approximate image size:
389MB (98MB remaining).
Contains:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Standard XP kernel.
Full system administration.
DP 83815 Ethernet driver.
TCP/IP including Winsock & command line utilities.
Remote administration.
Native remote debugging.
RAS with support for dial in and dial out.
SNMP.
Full workgroup participation with file and print sharing.
Internet information server including active server pages.
On-board serial, parallel, sound and AIM104 IO board drivers.
Touchscreen.
.NET framework v1.1.4.322.
Internet Protocol version 6.
Enhanced Write Filter
WinHTTP Service.
Minimal XPe
Summary:
Very small, includes display.
Approximate image size:
161MB (327MB remaining).
Contains:
Minimal XP kernel.
DP 83815 Ethernet driver.
TCP/IP including Winsock.
Native remote debugging.
On-board serial, parallel, sound and AIM104 IO board
drivers.
Enhanced Write Filter
© 2004 Arcom Issue D 22