SBC-GX1 Windows XP Embedded Quickstart About this manual
About this manual
This manual is designed to help you get your SBC-GX1 up and running as quickly as
possible. It explains the components of your SBC-GX1 Development Kit you have
received and tells you how to unpack and connect the board. It also explains, amongst
other things, the use of Windows XP Embedded in the board and how you can transfer
images to the board.
Related documents
The SBC-GX1 Quickstart Manual is supplied as part of the SBC-GX1 Development Kit.
This kit also includes a CD-ROM with a copy of this manual and a copy of the SBC-GX1
Technical Manual. Other manuals may be referred to from time to time. These are
normally provided on the CD-ROM that accompanies your Development Kit.
Conventions
Symbols
The following symbols are used in this guide:
Symbol
Explanation
Note - information that requires your attention.
Tip - a handy hint that may provide a useful
alternative or save time.
Caution – proceeding with a course of action may
damage your equipment or result in loss of data.
Jumper fitted on pin A.
Jumper fitted on pin B.
Jumper is fitted.
Jumper is not fitted.
B
B
© 2004 Arcom Issue D 8
To Next Page
Loading...
Need help?
General
