Arcom SBC-GX1 Quick Start Manual

SBC-GX1 Windows XP Embedded Quickstart Reinstalling Windows XP Embedded
Installing the Windows XP Embedded Minimal XPe image
The support CD that accompanies the SBC-GX1 Development Kit includes an ISO
image of a CD that you can use to install the Minimal XPe image onto your SBC-GX1
quickly and easily. When you install the images section of this CD, the ISO image is
copied to your hard disk. It can be found in the following folder:
\Arcom\XPEmbedded\SBC_GX1\Images\MinimalXPe.iso
This ISO image creates a bootable CD, very similar to the installation CD provided with
your Development Kit. This can be used to install the Minimal XPe image in exactly the
same way as described in Reinstalling Windows XP Embedded
, page 30.
Software such as Ahead’s Nero Burning ROM or Roxio’s Easy CD Creator can be used
to burn the ISO image to CD-ROM.
© 2004 Arcom Issue D 31

Arcom SBC-GX1 Specifications

General

Brand	Arcom
Model	SBC-GX1
Category	Motherboard
Language	English