SBC-GX1 Windows XP Embedded Quickstart Network settings
Network settings
The version of Windows XP Embedded installed on the CompactFlash module already
contains a driver for the on-board Ethernet controller and Microsoft TCP/IP networking.
It also contains a DHCP client that automatically configures TCP/IP to run on your
network. If you don’t use a DHCP server for network configuration you must configure
TCP/IP manually from the control panel.
If the SBC-GX1 is connected to a workgroup-based network it appears in the network
neighbourhood under the name ‘WORKGROUP’. If you want to connect to an XP
domain-based network, you must change from a workgroup to a domain-based network
and enter the name of the domain you wish to join. To do this, follow these steps:
1 Select Start → Control Panel → System → Computer Name → Change →
Domain.
2 Enter the name of the domain you want to join and click on OK.
You are asked for the user name and password of an account with permission to
join the domain. You can get these from your network administrator.
3 Enter the user name and password and click on OK. Once the SBC-GX1 appears
in your network neighborhood, files can be copied to and from the board in the
same way as with any other desktop system on the network.
© 2004 Arcom Issue D 24
To Next Page
Loading...
Need help?
General
