Areca ARC-1200 - Page 23

HARDWARE INSTALLATION
23
SNMP Manager Console Integration
• In-Band-Using PCIe Bus
Before launching the SNMP agent in the sever, you need to en-
able the reware-embedded SNMP community conguration rst
and install Areca SNMP Extension Agent in your server system. If
you need additional information about installation and start-up the
function, see the SNMP Operation and Installation section in the
Appendix C
Single Admin Portal (SAP) Monitor
This utility can scan for multiple RAID units on the network and
monitor controller set status. It also includes a Disk Stress Test
(DST) utility to identify marginal spec disks before putting the RAID
unit into a production environment.
For additional information, see the utility manual in the packaged
CD or download it from the web site http://www.arec.com.tw