Arjo Tornado - Operator Password and Levels

18
2.5.2 Requirements for KIWA certied installations
Use KIWA approved check valves from Arjo (A) between the water
connections (B) and the machine water hoses (C).
002396
C
A
B
Figure 9. Installation of check valves
2.5.3 Requirements for backow prevention installations
Backow prevention devices are to be added during bath
installation. The backow prevention device is a Dual Check
Valve – part number RMC7186.2 which is made of chrome and is
Australian Watermarked.
2.5.4 Connect water
Connect the water as follows:
1. Check that the requirements for pipes and water connections
are met.
2. Fit the Dual Check Valves at the water taps.
3. Connect the water.
4. For KIWA certied installations, check that the check valves
are attached correctly.
5. Seal all connections with PTFE tape.