Arjo Tornado - Preface

8
1.2 Isolator switch
The machine must always be equipped with a separate isolator
switch in the feed power supply. The isolator switch must be easily
accessible on a wall close to the machine. The external electrical
isolator switch must be marked “I” and “O” to identify the position of
the switch.
1.3 In an emergency
• Switch o󰀨 the main switch.
• Close shuto󰀨 valves in the water and any steam supply lines.
1.4 Product liability
CE marking indicating conformity with European Community
harmonised legislation.
Any modication or incorrect use of the equipment without the
approval of Arjo negates Arjo’s product liability.
CE marking indicating conformity with European
Community harmonised legislation
Figures indicate Notied Body supervision.
1.5 Attention symbols
There are warnings, instructions, and advice in this manual that
require extra attention. The symbols and designs used are:
Risk of injuries or machine damage.