Arjo Tornado - 4 Inspecting the Installation; When the Work Is Complete, Check that

24
4 INSPECTING THE INSTALLATION
4.1 When the work is complete, check that
• all parts have been installed according to the installation
manual.
• all screws have been properly tightened.
• there are no sharp edges on any parts that may come into
contact with people.
• all hoses, pipes and connections are intact and free from
defects.
• all the functions of the machine are working properly. Adjust if
necessary.
Carry out an Installation Qualication, an Operating Qualication,
and a Performance Qualication according to ISO 15883 before
putting the machine into service.
Incorrect use may result in damage to objects and personal injury.