Arjo Tornado - Safety Precautions; Important Safety Instructions; Emergency Procedures

9
2 INSTALLATION OF MACHINE
2.1 General
2.1.1 Make sure assembly and installation work is carried out
WARNING!
To avoid the risk of back injury, this equipment
should be assembled and installed by at least two
people.
• by qualied personnel.
• in accordance with current local regulations and rules.
• for indoor installation only.
• not to be installed in wet locations.
• in accordance with AS/NZS 3500.1 and AS/NZS 3500.2
including the installation of any non-integral backow
prevention device.
2.1.2 Installation order
Carry out the installation in the following order:
1. Unpacking
2. Assembly
3. Connecting water
4. Connecting electric power
5. Installation inspection
2.1.3 Installation alternatives
The following installation alternatives exist:
Type (Designation) Possible positioning
Free-standing model
(FD1800, FD1810)
Placed on the oor next to the
wall or attached to a wall.
Under-bench model
(FD1805)
Under a bench or similar.