7.3.15. Distortion
Going far beyond traditional fuzz-box distortion, the one in Prophet-5 V offers 15 algorithms
including soft and hard clipping, tape saturation, and all manner of non-traditional
waveform mangling. Try them all!
Control Description
Drive Equivalent to “pre gain” on an amp or distortion pedal, this sets amount of distortion applied.
Output Gain Sets the output level of the effect.
Auto Activates automatic control of the Output parameter to avoid downstream clipping.
Type Drop-down chooses from 13 different distortion algorithms.
Filter On/Off Enables or bypasses a built-in filter.
Cutoff Sets the cutoff or center frequency of the filter.
Resonance Adjusts a level peak located at the filter frequency.
Filter Mode Sets the filter to low-, band-, or highpass.
Pre/Post Decides whether the filter applies before or after the distorted sound.
Dark Applies an extra 12dB-per-octave lowpass filter at the distortion output.
87 Arturia - User Manual Prophet-5 V - Effects
To Next Page